Led light strip installation method LED light strip application range

Guide: We may have been exposed to the light strip product, it can not only play the role of lighting as ordinary lamps, but also because of the appearance of the design, so it also has an excellent decorative effect, its rich style is very suitable for consumers to trust select. So today we mainly learn how to install led lights, and the scope of application of LED lights, let's learn together!

Led light strip

Led light strip installation method

1, led lamp with installation method, power connection method: LED lamp with a general voltage of 12V DC, so you need to use Switching Power Supply, the size of the power supply according to the power of the LED lamp and the connection length. If you don't want each LED strip to be controlled by a single power supply, you can purchase a relatively large switching power supply for the total power supply, and then connect all the LED lights with the input power supply in parallel (when the wire size is not enough, you can extend it separately). Uniformly powered by the main switching power supply. The advantage of this is that it can be centrally controlled. The inconvenient place is that the lighting effect and switching control of a single LED strip cannot be achieved. The specific method can be measured by itself. There is a "scissor" mark per meter, which can only be cut when the mark is cut. If it is cut or wrong, it will cause one meter to be off! It is best to carefully look at the mark position before cutting it in the middle where it is not connected.

2, led lamp with installation method, pay attention to the connection distance of LED lights: In general, 3528 series of LED lights, the connection distance is up to 20 meters, 5050 series of LED lights, the longest connection distance is 15 meters . If this connection distance is exceeded, the LED strip is prone to heat, which will affect the service life of the LED strip during use. Therefore, the installation must be installed in accordance with the requirements of the manufacturer, should not let the LED lights with overload operation.

3, led light belt installation method, each light strip must be equipped with a special plug (plug with transformer), the transparent plastic cover must be removed when connected, and then the test light is covered. Do not connect directly with the cover, so it is easy to short circuit!

Led light strip

4, led light strip installation method, controller connection method: LED marquee belt and RGB full color light strip need to use the controller to achieve the changing effect, and the control distance of each controller is different, in general, simple controller The control distance is 10 to 15 meters, the remote controller's control distance is 15 to 20 meters, and the longest can be controlled to 30 meters. If the LED strip has a long connection distance and the controller cannot control that long strip, then a power amplifier is needed for tapping.

5, led lamp with installation method, when the lamp is installed, it is generally placed in the lamp slot, it can be straightened, or it can be fixed with a string or a thin wire. For exterior or vertical installation, you need to buy a clip and a tail plug. The original clip is completely transparent, this shop does not give ~ If it is installed outdoors, it is best to put waterproof glass glue on the tail plug and plug after installation, so that the waterproof performance is better.

LED light strip application range

The applicable range of LED light strips is divided into LED flexible strips and LED hard strips.

The main uses of LED flexible strips are: parks, gardens, buildings outside, roads, overpasses, cars, pools, advertisements, signboards, interiors, neon lights or aesthetics.

The main purpose of LED hard light strips is: jewelry, display counters, home villa lighting, hotels, shopping malls, office buildings, leisure venues, decorative lighting and other lighting places, is the ideal lamp to replace traditional fluorescent tubes.